OasisStone™ Yorkshire Castle Stone 120″ x 40″ Bar Height Panel Mold

We’ve re-imagined castle stone with one of the most talented masonry panel mold builders in the nation and came up with our OasisStone™ Yorkshire Castle Stone Mold. Our take on castle stone is reminiscent of the hand-quarried, meticulously placed stone walls found in the opulent castles high above the banks of the Rhone… elegant and regal. This 10’ long, bar-height mold is sure to help you sell more castle stone outdoor kitchens!  Unlike veneers, our molds are designed to stand on their own without any internal structural support necessary.

• Width: 10 ft. (120 In.)
• Height: 3.3 ft. (40 in.)
• Depth: 1.25 in. – 2 in.
• Coverage: 33 sq. ft.

1. Make sure panel is placed on a level surface.
2. Vacuum mold surface with shop vac fixed with brush attachment.
3. Use pump sprayer to lightly and evenly coat surface with OasisStone™ Mold Release for an easy extraction once cured. Wipe up any pooled liquid with clean cloth.
4. Mix OasisStone™ Masonry Panel and Concrete Mix Per Instructions.
5. For best results, use vibration table.  If not available, lift and slap edges of mold to release any trapped air bubbles.
6. Cover with 1.5 mil sheet plastic to help even out and increase curing time.  If pouring below 60°F, place electric heating blankets on top of plastic to help with curing.
7. After approximately 4 hours, you’re ready to flip your casting and pull away from mold