Please Note: Due to flammability, this product has a government regulated $35.00 hazardous material shipping fee. Fee will be assessed during checkout.
OasisStone™ Panel Armor is specifically designed for use on panels poured with OasisStone™ Panel Mix to provide stain protection by penetrating and chemically reacting with the natural materials found in the mix to create a permanent bond.
- Permanent part of the surface
- Will not chip or peel
- Resistant to all common staining agents
- Easy application
- Color enhancing
- Thin build high performance
SURFACE PREPARATION: Surface must be clean, free of dust, dirt, mildew, oil, grease, paint, sealers, curing agents, waxes, and surface contamination. An extremely dense surface is required for proper performance.
APPLICATION: Professional use only product. OasisStone™ Panel Armor can be brushed or rolled but for best results and to avoid over application it is recommended to be sprayed on using a high quality pump up sprayer with Viton seals and a fine to medium tip. Application rates vary from 400 sq ft. / gallon on re-seals and power troweled concrete to 150 sq ft. / gallon on porous concrete.
It is important to not over apply OasisStone™ Panel Armor so that it remains breathable; the best way to ensure correct application is to apply two thin coats. First coat should color enhance most of the surface but leave no shine. The second coat will even out the surface to a uniform color enhanced look with no to a very slight sheen.
Water proof in 10 minutes • Walk able in 20-30 minutes • Traffic in 2 hours • Can be applied to a damp surface (no standing water) • Application temps between 35F—95F
Reviews
There are no reviews yet.